Looking For Whirlpool Gas Dryer Parts ? We"ve Done The Hard Work For You
![]() |
![]() Whirlpool Dryer Belt 52556 NEW US $10.00
|
![]() Whirlpool GX5SHDXVD 36 French Door Refrigerator US $1,149.99
|
![]() NEW WHIRLPOOL END CAP RH PART 8274434 US $7.75
|
Find More Whirlpool Gas Dryer Parts Below. Scroll Down Now!
![]() |
![]() Whirlpool Dryer Belt 52556 NEW US $10.00
|
![]() Whirlpool GX5SHDXVD 36 French Door Refrigerator US $1,149.99
|
![]() NEW WHIRLPOOL END CAP RH PART 8274434 US $7.75
|
![]() New Whirlpool Gas Dryer Ignitor 279311 US $19.00
|
![]() Aga Cookers Full Line Dealer All Styles and Colors US $16,960.00
|
![]() NEW Aga Legacy 36 All Colors and Styles Available US $5,499.99
|
Whirlpool gas dryer not drying clothes fast enough?
The dryer is not drying clothes fast enough. I have cleaned the lint trap and took the dryer apart to make sure the entire ventilation system is clear. I observe the gas ignites for approximately 10 seconds and then shuts off. I have measured continuity across the pins on the solenoid and it appeared to be correct. I found when I would short the pins on the high temperature thermostat and the gas would stay on continuously. I replaced this part and observed the Gas Burner acting as it had before, where it only stays on for a brief period of time. My question is how long should the burner stay on when it is operating normally? What else could be wrong with the dryer? If the solenoid is bad, I am under the impression that there will be no ignition at all, is this correct?
Since this is a GAS appliance I wouldn't suggest having repairs done by any one other than a licensed tech. It certainly sounds like you're knowledgeable about the drier and mechanics of it. BUT..I'm worried about the appliance malfunctioning (at night!) and you having a gas leak. I would turn off the gas and call my nearest Gas Appliance (Licensed approved) technician. Sorry


US $16.49

























