If You Need Information On Sealed Burners Then This is The Best Untapped Resource On The Web
 |
 GE 36 Gas Cooktop 5 Sealed Burners JGP633DETWW White  US $618.99
|
 GE 30 Gas Range w 5 Sealed Burners Convection Oven JGB840SETSS SS US $1,490.99
|
 AMANA BLACK 3 BURNER COOKTOP US $200.00
|
 KUPPERSBUSCH 24 Glass Ceramic Knob Control Cook Top US $499.00
|
 12500050 SEALED BURNER US $21.50
|
 Dacor Epicure ESG486 48 in Gas Cooktop US $3,300.00
|
 Dacor SGM466S 46 Natural Gas Cooktop 6 Sealed Burners US $1,849.00
|
 Frigidaire Gas Stove 4 Burner Oven US $525.00
|
 Frigidaire FFGF3023LS 30 Freestanding Gas Range Stainless Steel US $609.99
|
 Kenmore Elite 36 Gas Cooktop 32473 US $750.00
|
 KitchenAid 36 Gas Cooktop KGCS166GBL in black US $495.00
|
 DCS RANGE RGU 485GD N WITH FREE DISHWASHER DEAL DD24DUT BOTH NIB WITH WARRANTY US $6,969.00
|
Coleman furnace problem?
I have a 1989 Coleman direct vent (sealed combustion system) forced air furnace equipped with standing pilot
Model 7665-856
serial 048272343
This problem only occurs when it is really cold outside. When I need the furnace the most. The furnace starts up normally. Burner turns on then fan turns on. Burner turns off and on as needed. Then both turn off at same time. I'm guessing its the high temp switch that pops out but is not pushable yet. Furnace cools off for about 20-30 minutes and blower turns on for about 15 seconds then turns off. Button is pushable and cycle starts over except this time burner only goes on about once or twice before they both shut off. What do I need to do/replace? Any help would be greatly appreciated. Also where is the best place to get the parts. Thanks a lot
When any limit switch starts tripping it is time to call a pro.
Many times, the cause is not always the obvious one.You may have an air movement problem but then again it may be the inducer that's the culprit.
Bite the bullet and call a pro before you cause expensive damage to your equipment.
Good luck.