If You Need Information On Inch Stainless Then This is The Best Untapped Resource On The Web
![]() |
![]() 42 STAINLESS w BAFFLE filter WALL RANGE HOOD BREA 42 B US $449.00
|
![]() 36 Kitchen WALL RANGE HOOD STAINLESS BAFFLE ELISA 36 B US $329.00
|
![]() 42 KITCHEN WALL RANGE HOOD STAINLESS BAFFLE ELISA 42 B US $458.00
|
![]() LG LRG30357ST 30 FREESTANDING GAS STAINLESS RANGE US $829.00
|
![]() 36 WALL MOUNT STAINLESS STEEL RANGE HOOD T2 36 US $769.00
|
![]() 36 Stainless Steel Wall Mount Range Hood FAZ 36 US $329.00
|
![]() 30 Inch Baffle Filter Under Cabinet S S Range Hood A 21 US $409.00
|
![]() Euro Design 36 Glass Island Range Hood Vent 900CFM US $337.00
|
![]() Stainless Steel 30 Oven Range Hoods Island Kitchen 1 US $449.00
|
![]() Stainless Steel 30 Wall Mount Kitchen Hood Stove 3 US $299.00
|
![]() Stainless Steel 30 Oven Range Hood Island Kitchen 3 US $449.00
|
![]() Stainless Steel 30 Kitchen Island Range Hoods Vent 2 US $449.00
|
![]() 30 GLASS ISLAND Range Vent Stove Hood best seller US $399.00
|
![]() 30 Wall Mount Range Chimney Vent Hood just arrived US $299.99
|
![]() 30 Wall Mount Range Chimney Vent Hood new model US $299.99
|

I am trying to connect one half inch stainless tubing. I cannot get the nut to thread on the male threads.?
The threads do not look stripped. I am using compression fittings to fasten the tubing to a bushing that is welded into a flange. Needless to say, I cannot just unscrew the bushing from the flange and replace it.
Have you checked that both threads are the same gauge?
If the nut refuses to start on the thread, chances are the thread on the nut is a finer gauge than on the stud. If the nut starts on the stud but then seizes, the thread on the nut is coarser than the thread on the stud.
Check both thread pitch and diameter. You can check thread pitch by finding a bolt that fits the nut and then laying the thread of the bolt alongside the thread on the stud. If they are the same pitch the two threads will interlock. If they are not they won't. If that happens find a bolt that matches the thread on the stud and then get some new nuts of the same size.
Good luck!


US $449.00




























